Looking for a silicone 3D printer?

You may not need to buy one. Upload your CAD file, see the price in seconds, and get true silicone parts that are ready to ship within 5 days.

Buy a printer, or order the parts?

A printer is one way to get silicone parts. For prototypes, test series and small production runs, ordering them is usually faster and cheaper.

Your own silicone 3D printerParts from Spectroplast
Cost before the first partMachine, material stock, post-processing equipment, a trained operatorNone. You pay per part.
Time to the first partProcurement, installation and process tuning come firstReady to ship within 5 days with Express
MaterialDepends on the machine. Check whether it prints true silicone or a silicone-like elastomer.True silicone: TrueSil in four grades, Shore 20A to 60A
QuantitiesPays off at steady, high volumeFrom a single part to more than 1,000, with no minimum quantity
Process know-howYours to build: design rules, curing, quality checksOurs: ISO 9001 certified production

Why silicone is harder to print than plastic

Most 3D printers melt a plastic and let it harden again. Silicone does not work that way. It is a thermoset: once it has cured, it stays that way, which is exactly why it survives heat, chemicals and years of flexing.

So silicone has to be cured in place, layer by layer, and post-cured afterwards to reach its final properties. That needs a process built for silicone, and a standard filament printer is not one. Flexible filaments such as TPU and TPE print easily, but they are not silicone and do not behave like it.

We print TrueSil with a light-based process and post-cure every part before it leaves us.

What you get when you order

  • True silicone

    TrueSil, not TPU or TPE. Four grades: A20, A35, A50 and A60, from Shore 20A to 60A.

  • A price in seconds

    Upload the CAD file and the shop shows the price straight away.

  • Parts in days

    Ready to ship within 5 days with Express, 10 with Priority, 15 with Standard.

  • No tooling, no minimum quantity

    One prototype or a small series: the part is printed from your file, with no mold.

Read more

When your own printer makes sense

If you need silicone parts every day, in house and at steady volume, a machine of your own can pay off. Talk to us first: we print silicone every day and can tell you what a production setup really takes.

Questions about silicone 3D printers

Skip the printer. Get the part.

Upload your file and see what your silicone part costs.